(MAE) # tftpboot mae4xx_xenial_v3_0_0testing.img
Using eth1 device
TFTP from server 192.168.253.1; our IP address is 192.168.253.221
Filename 'mae4xx_xenial_v3_0_0testing.img'.
Load address: 0x48000000
Loading: #################################################################
#################################################################
#################################################################
〜〜〜 中略 〜〜〜
#################################################################
#################################################################
#################################################################
#########################################
done
Bytes transferred = 76933210 (495e85a hex)
(MAE) # zipextract $fileaddr $filesize Archive: Length Method Size Cmpr Date Time CRC-32 Name -------- ------ ------- ---- ---------- ----- -------- ---- 3659232 Stored 3659232 0% 2017-09-22 09:19 ba0d7c9f kernel.img 604160 Stored 604160 0% 2017-09-22 09:19 f40c3c5e kmod.img 2834804 Stored 2834804 0% 2017-09-22 09:20 4540c307 initramfs.img 69804032 Stored 69804032 0% 2017-09-22 09:20 f5da6a6c rootfs.img 27536 Defl:N 6898 75% 2017-09-22 09:19 ccedb3ff dtb.img 100137 Defl:N 23184 77% 2017-09-22 09:19 ed316397 .config -------- ------- --- ------- 77029901 76932310 1% 6 files
(MAE) # firmup $fileaddr $filesize firmup: zip addr: 48000000, zip len: 76933210 ==> extract buffer addr: 4c95e85d * search kernel.img... file 'kernel.img' compression type is COMP_NONE, stored at addr: 48000044, size: 3659232 (0x0037d5e0) * updating kernel... device nand0 <nand0>, # parts = 1 #: name size offset mask_flags 0: nand0.ubi 0x20000000 0x00000000 0 active partition: nand0,0 - (nand0.ubi) 0x20000000 @ 0x00000000 defaults: mtdids : nand0=nand0 mtdparts: mtdparts=nand0:512M(nand0.ubi) Creating 1 MTD partitions on "nand0": 0x000000000000-0x000020000000 : "mtd=0" UBI: attaching mtd2 to ubi0 UBI: physical eraseblock size: 262144 bytes (256 KiB) UBI: logical eraseblock size: 253952 bytes UBI: smallest flash I/O unit: 4096 UBI: VID header offset: 4096 (aligned 4096) UBI: data offset: 8192 UBI: fixable bit-flip detected at PEB 171 UBI: attached mtd2 to ubi0 UBI: MTD device name: "mtd=0" UBI: MTD device size: 512 MiB UBI: number of good PEBs: 2048 UBI: number of bad PEBs: 0 UBI: max. allowed volumes: 128 UBI: wear-leveling threshold: 4096 UBI: number of internal volumes: 1 UBI: number of user volumes: 12 UBI: available PEBs: 0 UBI: total number of reserved PEBs: 2048 UBI: number of PEBs reserved for bad PEB handling: 40 UBI: max/mean erase counter: 332/9 3659232 bytes written to volume kernel.0 * search dtb.img... file 'dtb.img' total length extracted: 27536 (0x00006b90) * updating dtb... 27536 bytes written to volume dtb.0 * search initramfs.img... file 'initramfs.img' compression type is COMP_NONE, stored at addr: 48410ead, size: 2834804 (0x002b4174) * updating initramfs... 2834804 bytes written to volume initramfs.0 * search kmod.img... file 'kmod.img' compression type is COMP_NONE, stored at addr: 4837d666, size: 604160 (0x00093800) * updating kmod... 604160 bytes written to volume kmod.0 * search rootfs.img... file 'rootfs.img' compression type is COMP_NONE, stored at addr: 486c5065, size: 69804032 (0x04292000) * updating rootfs... 69804032 bytes written to volume rootfs.0 * search opt.img... zip_extract: file 'opt.img' not found in zip archive. -> not found. * search u-boot.bin.img... zip_extract: file 'u-boot.bin.img' not found in zip archive. -> not found. SF: Detected S25FL256S with page size 64 KiB, total 32 MiB * set latest firmware area: 0 (MAE) #
(MAE) # firminfo -h firminfo - get/set firmup history Usage: firminfo firminfo [[OPTIONS]] <arg> -g <nums> get firmup history -s <area> set firmup history -q be quiet
(MAE) # firminfo -g 10 SF: Detected S25FL256S with page size 64 KiB, total 32 MiB === firmup history === - entry 0: timestamp: 1507608945 (2017/10/10 13:15:45) area: 0x10 - entry 1: timestamp: 1507607812 (2017/10/10 12:56:52) area: 0x11 - entry 2: timestamp: 1506917910 (2017/10/02 13:18:30) area: 0x10 - entry 3: timestamp: 1506904673 (2017/10/02 09:37:53) area: 0x11 - entry 4: timestamp: 1506829539 (2017/10/01 12:45:39) area: 0x10 - entry 5: timestamp: 1506667118 (2017/09/29 15:38:38) area: 0x11 - entry 6: timestamp: 1506653802 (2017/09/29 11:56:42) area: 0x10 - entry 7: timestamp: 1506586740 (2017/09/28 17:19:00) area: 0x11 - entry 8: timestamp: 1506586164 (2017/09/28 17:09:24) area: 0x10 - entry 9: timestamp: 1506580286 (2017/09/28 15:31:26) area: 0x11 (MAE) #
(MAE) # bootinfo -h bootinfo - get/set boot history Usage: bootinfo bootinfo [[OPTIONS]] <arg> -g <nums> get boot history -s <area> set boot history -q be quiet
(MAE) # bootinfo -g 10 === boot history === - entry 0: timestamp: 1507767905 (2017/10/12 09:25:05) area: 0x10 stat: 0x3f (Boot succeeded) - entry 1: timestamp: 1507609036 (2017/10/10 13:17:16) area: 0x10 stat: 0x3f (Boot succeeded) - entry 2: timestamp: 1507607852 (2017/10/10 12:57:32) area: 0x11 stat: 0x3f (Boot succeeded) - entry 3: timestamp: 1507602067 (2017/10/10 11:21:07) area: 0x10 stat: 0x3f (Boot succeeded) - entry 4: timestamp: 1506917992 (2017/10/02 13:19:52) area: 0x10 stat: 0x3f (Boot succeeded) - entry 5: timestamp: 1506904808 (2017/10/02 09:40:08) area: 0x11 stat: 0x3f (Boot succeeded) - entry 6: timestamp: 1506901562 (2017/10/02 08:46:02) area: 0x10 stat: 0x3f (Boot succeeded) - entry 7: timestamp: 1506830076 (2017/10/01 12:54:36) area: 0x10 stat: 0x3f (Boot succeeded) - entry 8: timestamp: 1506829561 (2017/10/01 12:46:01) area: 0x10 stat: 0x3f (Boot succeeded) - entry 9: timestamp: 1506667494 (2017/09/29 15:44:54) area: 0x11 stat: 0x3f (Boot succeeded)